CAD-CUT UltraWeed Heat Transfer Vinyl 12-Fast Shipping

Description

CAD-CUT® UltraWeed™ Heat Transfer Vinyl

Material Specifications

• Composition: Polyurethane (PU)
• Carrier: High-Tack, Clear
• Thickness: 90-100 microns (.09-.1mm)
• Washability: 50
• Safety: CPSIA Certified
• Laser cutter compatible

Application Instructions

1-Color Application Instructions

Time:12 secondsTemperature:260-300°FPressure:MediumPeel:Hot

2-Color Application Instructions

Time:Press background layer for 2-3 seconds, place foreground layer for full application of 12 secondsTemperature:260-300°FPressure:MediumPeel:Hot

Hotronix® 360 IQ™ Hat Press

Time:45 secondsUpper:280°FLower:320°FPressure:MediumPeel:Warm/ColdCover Sheet:1/8″ Foam Pad

Special Notes

If the garment is 50% or more cotton it will require 280°F + degrees.

Care Instructions

Machine wash inside-out using mild detergent. Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.

Storage

Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.

Material/Fabric Compatibility

• 100% Cotton
• 100% Polyester
• Cotton/Poly Blends
• Lycra®/Spandex Blends

Note

The recommended time, temperature, and pressure settings are for Stahls’ Hotronix® heat press machines. Settings on other heat presses may vary.

Cutter Instructions

CutterBladeForceOffsetSpeedGraphtec45°7-9020cm/sRoland GS-2445°60-90g.2520cm/s View Craft Cutter SettingsNote: Always test cut prior to any production run. For optimal cutting and weeding, maintain a line thickness of at least 1/16″ for lettering & Application Instructions