Floriani Perfect Stick Tearaway-Fast Shipping

Description

To use Perfect Stick® Tearaway:

1. Place one piece of Perfect Stick Tearaway®, paper side up, into the embroidery frame and make sure it is “tambourine skin” tight.
2. Score the paper with a straight pin or scissor tip and peel back the protective paper to expose the sticky surface.
3. Smooth the item to be embroidered into place.
4. Place the embroidery hoop on the machine and center the design.
5. Use a topping if necessary and secure the corners.
6. Stitch the design.
7. To remove Perfect Stick Tearaway®, dampen the back of the embroidery with a wet cloth or sponge. Allow the moisture to penetrate for 10 seconds and then tear away the stabilizer.

On average, Floriani Perfect Stick® Tearaway should support a design with no more than 10,000 stitches and/or around 4″ x 5″ in size. If the design has a higher stitch count, simply “float” a square of Floriani Stitch N Wash TearAway between the hoop and the bed of the machine to support the additional stitches.