Description
Small Roller Foot With Needle Plate & Feed Dogs – Singer
Part Number
12438 – Needle Plate
12436 – Feed Dog
12264 – Small Roller Foot
These Serrated Roller Presser Feet are perfect for sewing Leather, Nylon, Plastics, Foam Rubber, Laminated Fabric/Material, etc. Significantly improves feeding of these materials through your machine Allows Free-Style stitching with very sharp turns Improves visibility of stitches while sewing shapes, box and bar/flag tacks Attaches simply; similar to standard presser foot For improved control and consistent stitches, with new Feeder, requires: Centering of the Feeder stroke within the Feeder slots in the Needle Plate. This is required if your Feeder is hitting the Needle Plate in either the front or back during the feeding motion. To make this adjustment, loosen either of the screws under the Feeder (NOT the Feeder screws themselves). Only loosen one or both of these screws enough to allow the Feeder to be moved with your fingers slightly from front to back within the Needle Plate Feeder slots. Do NOT loosen so much that there is no feeding motion. Turn the Hand-Wheel slowly in the normal direction to make certain that the Feeder is centered within the Needle Plate Feeder slots. Tighten screws after Feeder centered. Also note that the height of the Feeder may also require adjustment.
MACHINE COMPATIBILITY:
Artisan Models: 196R, 5550N, 8500N, ZJ-100
Brother Models: B705, B707, B715, B716, B735, B737, B738, B745, B755, B757, B758, B767, B781, PQ1300, PQ1500
Consew Models: 30, 98, 99, 102, 103, 105, 210, 217, 218, 219, 220, 230, 231, 290, 310, 2230, 7360R-1
Econsew Models: DDL-5550, DDL-8500, DDL-8700
Feiyue Models: 8500, 8700
Gemsy Models: 8700
Janome Models: 1600P, 1600DB, 1600DBX
JUKI Models: DDL-127, DDL-227, DDL-500, DDL-552, DDL-553, DDL-555, DDL-5550, DDL-5600, DDL-8300, DDL-8500, DDL-8700, DDL-8900, DDL-9000, TL-98E, TL-98Q, TL-2000Qi, TL-2010Q
Mitsubishi Models: DB-120, DB-121, DB-122, DB-126, DB-130, DB-170, DB-189, DB-199, LS2-130, LS2-150, LS2-180, LS2-190, LS2-1130
Necchi Models: BU, Supernova, and others with the high shank presser foot system
Reliable Models: MSK-8800, MSK-8550M, MSK-8870M
Rex Models: RX8500
Singer Models: 31-15, 95, 96, 120U, 121C, 121D, 188K, 191D, 195K, 196K, 241, 251, 281, 366K, 400W, 402W, 451K, 491D, 591D, 600W, 660A, 691D, 770D, 771D, 2191, 2491D
Sunstar Models: KM-123A, KM-123B, KM-137A, KM-137B, KM-146BL, KM-250
Tacsew Models: 5550, 8500, 8500-T, T8700
Taiko Models: TK-505, TK-510
Yamata Models: FY8500, FY8700
Zoje Models: ZJ15-1, ZJ80-1, ZJ999-1, ZJ999-5, ZJ5580, ZJ5580-D3, ZJ8500-D3, ZJ8500N
And many other comparable industrial lockstitch sewing machines.
Presser Foot Shank Type: High Shank
Reviews
There are no reviews yet.